Labconco RXPert Double Filtered Balance System
This double-filtered balance system is a Class I biological safety cabinet that contains airborne particulates and powders, providing user protection during hazardous drug compounding or pharmaceutical manipulation. It is designed to meet the USP <800> requirements for non-sterile hazardous compounding. This system exhausts air through two levels of HEPA filtration, returning it safely to the lab. Both filters are 100% scannable and can be replaced using a true bag-in/bag-out system. No outside ducting is required.
*Base stand not included*
With Solid Epoxy Work Surface
2 ft Product Dimensions: W 24.0" × D 29.0" × H 50.5"
3 ft Product Dimensions: W 36.0" × D 29.0" × H 50.5"
4 ft Product Dimensions: W 48.0" × D 29.0" × H 50.5"
5 ft Product Dimensions: W 60.0" × D 29.0" × H 59.8"
- Comes with an 8-foot cord and a built-in analog airflow monitor
- Two exhaust HEPA filters, 99.99% efficient on particles 0.3 µm (microns) in size
- Easy 100% leak-detection scanning of both HEPA filters without altering or removing impellers or filters
- True bag-in/bag-out HEPA filter disposal system allows for safe filter replacement
- Front-mounted pressure gauge helps determine HEPA filter loading
- Built-in airflow monitor alerts the user to face velocities outside of preset range
- Upper dilution air supply sweeps clean air to the back of sash to keep contaminants away from the operator
- Upper containment sash foil directs contaminants away from the user’s breathing zone
- Clean-Sweep air foil allows air to sweep the work surface to maximize containment
- Side-entry airfoils allow air to sweep interior surfaces to enhance containment
- The positive pressure impeller is surrounded by a negative pressure plenum so that if a leak should develop, the unfiltered air is captured and re-filtered
- Rear baffle with zones of perforations promotes horizontal laminar airflow. The baffle pivots down for cleaning
- Ergonomic angled sash for comfortable viewing
- Quiet operation as low as 48 decibels
- Deep 23.4-in interior easily accommodates large analytical balances
- Built-in impeller has vibration isolation supports to minimize disturbance to sensitive balances
- The 1/4 in-thick tempered safety glass provides better fire, scratch and chemical resistance than acrylic and dissipates static charge
- Two 1.5-in utility ports with iris openings allow passage of tubing, electrical cords and cables from inside to back exterior for connection to services